- iOS device compatibility: iPhone 4S or higher; iPad 3 or higher; iPad Mini or higher, iPod Touch 5th gen or higher.
- Android device compatibility: Must be equipped with Bluetooth 4.0 (BLE) and Android 4.4 or higher version system. Check if your phone is BLE equipped >>
- Controller Max load: 3A per zone. (Each controller has 2 zones)
- Input voltage: 9-15V DC.
- Brake sensor input voltage: 12V.
- Reversed polarity protection: Yes.
- Transient voltage suppression: Yes.
- Controller Dimension: 4″ x 2.33 x 0.73″ (100 x 60 x 19cm)
- Applications: Check owner’s manual for bulb size.
- White COB chip: 30W
- RGB chip: 3W
- Lumen rating: 2750lm
- Input voltage: 9-16V DC
- Color temperature: 6000K
- Aluminum: 6063
- Waterproof: IP67
- Plug types: H4 H7 H8 H10 H11 H13 H16 HB2 HB3 HB4 HB5 9004 9005 9006 9007 9011 9012
- May not fit with dust cover
Turn Signal Upgrade Module Features:
- Turn signal: When the yellow sensor wire is activated by turn signal, the lights connected to the module will blink with turn signals, with or without the accent lighting being turned on.
- White light: when the white sensor wire is activated, the connected lights will change to solid white. The white wire can be attached to various signal sources such as headlight, reverse light, or door courtesy light for different purposes.
- 60w power amplifier: Even if the yellow and white wires are not used or activated, the module can serve as power amplifier. The lights will get main power from the red & black wires of the module and only draw a small amount of power from XKchrome controller as control signal, which enables larger scale installation that exceeds the 72w output of XKchrome controller.